By Troy Siahaan
Yamaha revealed an updated MT-07 that… well, let’s just say that if you aren’t a fan of the 2021 MT-09‘s new look, you likely won’t be a fan of this either. Chances are you won’t be a fan of the MT-10‘s next update either if it follows Yamaha’s smaller “Master of Torque” naked MT models.
The 2021 Yamaha MT-07 adopts a similar LED headlight to the MT-09, with a compact high/low beam projector lamp bracketed by two position lights. This new headlight is the most obvious and distinct design change for the new MT-07. There never really was much in the way of bodywork for the FZ/MT-07, but for this new redesign, the fuel tank shape is sculpted slightly differently with a higher shoulder line and reshaped fuel tank panels.
The radiator guard is also more streamlined (at least it looks that way from the photos), and the front turn indicators are much smaller LED stalks that don’t stick out nearly as much as the old incandescent bulbs on the previous model.
Go past the fuel tank, and there’s not much change in the styling except for a new license plate holder with LED indicators. The seat and seating position look the same, too, however, the new redesign brings with it wider aluminum tapered handlebars which should place the rider slightly more upright. Because the exhaust headers have been slightly repositioned, a new cover/guard can now be seen on the lower right side of the bike to protect from the hot surface.
The changes extend beyond the styling, as the CP2 engine gets some minor tweaks to help meet Euro5 regulations. A revised intake duct, new 2-into-1 exhaust routing (which meets behind the aforementioned heat shield), and a new ECU result in a …read more
Source:: 2021 Yamaha MT-07 First Look